Cyclists face much greater risks riding on roads than on separated bike paths. Collisions with a motor vehicle may be fatal. What makes a motor vehicle so deadly? When the bike is bent from the impact, we can imagine the injuries of the cyclist.
Vulnerable Road Users
Vulnerable road users are typically cyclists and pedestrians. People are soft but motor vehicles are not. When the two meet, it can be fatal. The problem of speed is discussed here: “Integrating Safe System with Movement and Place for Vulnerable Road Users” (Austroads, 2020).
Fatalities depend on vehicle speed
The relationship between the speed and energy of the motor vehicle is unfortunate. The cyclist will likely die in a collision with a car travelling at 50km/h. The good news: reduce the speed of the car to 30km/h and the cyclist will almost certainly survive, but injuries are still very likely. Cycling on bike paths on the verge and away from the road are safer than riding on the road.
The problem of energy
Motor vehicles at speed carry an enormous amount of energy that can shred two cars when they collide.
Double the speed of the motor vehicle and the energy increases four times (see chart below). Small increases in speed result in large increases in energy. The opposite is also true. Small reductions in road speed greatly reduce the energy and with it any fatalities. Reducing motor vehicle speed is the most effective and inexpensive measure to improve road safety.
The problem of braking
Stopping distances greatly increase with speed due to the energy relationship, which is then made worse by human reaction times. Our brain takes a relatively long time to recognise danger. Nothing we can do will shorten it. Distractions such as phones make it longer still. Even with the best intentions, our concentration will lapse and be slowed by fatigue.
In half of all fatal bike cycle accidents, the driver never manages to brake! This is why decreasing road speed limits make such a big difference for cyclists.
The stopping distances of typical passenger cars for a range of initial travel speeds are shown below. A car travelling 50km/h will take 30m to stop and will have moved 20m forward without any speed reduction before the driver can react and brake.
Making things better 🙂
So, what can we cyclists do to help change our car and speed loving culture? Here are a few ideas:
- 😊 Slow down when you pass a cyclist to set a good example. Emotions are contagious!
- 😊 Educate your family and friends about the risk of them driving too fast around cyclists.
- 😊 Use your lights and wear high vis bike clothing to make it easier for drivers to spot you.